MVRG Your service provider for industry and trade
Free Cool Chiller
Basic Information
Type
Used item
Category
Refrigeration & Air Conditioning
Item
Free Cool Chiller
Item number
7437
Manufacturer
AIREDALE
Model
1200 kW
Year of construction
2012
Description
water chillers with pumps and other supplementary equipment, like new/ was never used, in manufacturer's packaging
Price and terms of the delivery are open to negotiation.
More informations you will find in the attached data sheet.
The cooling equipment includes:
Pos. 1:
2 Free Cooling Chiller OFC103R20(E)-99HS3
Options included:
• Discharge mufflers
• Energy manager
• Discharge air plenum
• Closed transition compressor start
• Coil guards
• Anti-vibration mounts (spring type)
• R134A leak detection system
• Evaporator differential pressure sensor
• BMS interface card (ModBus)
• Remote set point adjustment (2 set points: summer/winter, digital input)
• Pump interlock
• Flow switch
• Low ambient kit
• Compressor enclosures
• Flushing by-pass (butterfly valve)
Pos. 2
1 Chiller Sequence Manager System including chiller sequence panel
Options included:
• Chiller Sequence Panel (OPC) with 2 x pCO3 Large controllers
• Common Return Water Temperature Sensors (Primary)
• Common Supply Water Temperature Sensors (Primary)
• Common Return Water Temperature Sensors (Secondary)
• Common Supply Water Temperature Sensors (Secondary)
• Ambient Air Temperature Sensors
• Modbus RS-485 interface card
• Full Set of Spares
Pos. 3
10 Downflow Chilled Water Precision Air Conditioning Unit: SmartCool
Features:
• Type: single circuit chilled water
• Power supply: 400V / 50Hz / 3 phases
• Air filters: pleated disposable panel filters G4 (EU4)
• Colour: black grey RAL 7021
• Chilled water coil: large surface area coil manufactured from refrigeration quality copper tubes with mechanically bonded aluminium fins coated with a non-stick acrylic film (hydrophilic).
• Fans: backward curved impellers, direct drive centrefugal fan assemblies with EC motors.
• Controls: AIRETronix microprocessor controller connected to LCD keypad display.
• Air flow switch
• Additional options included:
• Upgraded EC fans
• Open Floorstand
• Motorised air damper
• Constant pressure control
• Supply air temperature control
• pCOWEB interface card
• Filter change switch
• Water detector (probe type)
• Water detector (tape type)
• Audible display (upgraded microprocessor)
• Programmable software key
• Sensors bracket
• Dual power supply ATS and UPS
• Balancing and regulating valve + actuator
Pos. 4
2 Pump Etanorm G100-250 G11 with coupling spacer
Technical data:
• Pump standard: EN 733
• Design: Baseplate mounted, long-coupled
• Orientation: Horizontal
• Driver type: electric motor
• Motor size: 280S
• Efficiency class: IE2 acc. Tto IEC 60034-30
• Motor material: Grey cast iron GG/CAST IRON
• Position of terminal box: 0°/360° (top)
• Baseplate type: U-beam/folded plate, Steel ST
• Coupling guard type: Lightweight, not tread proof
• Suction nominal dia.: DN 125, EN 1092-2
• Discharge nominal dia.: DN 100, EN 1092-2
• Suction/discharge nominal pressure: PN 16
• Shaft seal: Single acting mechanical seal, BQ1EGG
• Volute casing, discharge cover, impeller and bearing bracket material: grey cast iron JL 1040
• Shaft: Steel/Tempered steel E335/C45
• Joint ring: DPAF Sealing plate, asbestos-free
• Shaft sleeve: Stainless steel 1.4571
• Bearing type: Anti-friction bearings
• Lubrication type: Grease
• Color: Ultramarine blue (RAL 5002)
Pos. 5
2 x Pump control system Hyamaster SPS 1-750/1FU
Technical data:
• Switchgear for 1 pc. pump/motor
• Switchgear unit stainless steel 1.4301 (steel RAL 7035)
• Socket 200 mm
• 1 pc. frequency converter
• Main switch
• Air circulation cooling
• Fuses and contactors
• Terminal strip
• Set of pressure transmitters
• ModBus interface for external BMS monitoring
Pos. 6
3 x Pump Etanorm G100-200 G11 with coupling spacer
Technical data:
• Pump standard: EN 733
• Design: Baseplate mounted, long-coupled
• Orientation: Horizontal
• Driver type: electric motor
• Motor size: 225M
• Efficiency class: IE2 acc. to IEC 60034-30
• Motor material: Grey cast iron GG/CAST IRON
• Position of terminal box: 0°/360° (top)
• Baseplate type: U-beam/folded plate, Steel ST
• Coupling guard type: Lightweight, not tread proof
• Suction nominal dia.: DN 125, EN 1092-2
• Discharge nominal dia.: DN 100, EN 1092-2
• Suction/discharge nominal pressure: PN 16
• Shaft seal: Single acting mechanical seal, BQ1EGG
• Volute casing, discharge cover, impeller and bearing bracket material: grey cast iron JL 1040
• Shaft: Steel/Tempered steel E335/C45
• Joint ring: DPAF Sealing plate, asbestos-free
• Shaft sleeve: Stainless steel 1.4571
• Bearing type: Anti-friction bearings
• Lubrication type: Grease
• Color: Ultramarine blue (RAL 5002)
Pos. 7
1 x Automatic pump control system Hyamaster SPS 3-450/3FU
Technical data:
• Switchgear for 3 pcs. pumps/motors
• Switchgear unit stainless steel 1.4301 (steel RAL 7035)
• Socket 200 mm
• 3 pcs. frequency converters
• Main switch
• Air circulation cooling
• Fuses and contactors
• Terminal strip
• Set of pressure transmitters
• ModBus interface for external BMS monitoring
• LAN connection with second cabinet to provide 1+1 control redundancy of the system
Pos. 8
2 x Plate heat exchanger FP 120
Technical data:
• Plates: W 1.4404 (AISI 316L), 0,5 mm
• Gaskets: EPDM
• Frame: C-Steel, painted RAL 5012
Pos. 9
1 x Parallel/redundant precision pressure maintenance system with integrated degassing
Including:
• Precision pressure maintenance unit with pumps (integrated degassing) Transfero TPV4.1 – 4 pcs
• Primary vessel Transfero TG1000– 4 pcs
• Expansion vessel w. fixed air cushion Statico SD35.10 – 4 pcs
• Lock shield valve DLV 20 – 4 pcs
• Communication module ComCube DCD – 2 pcs
Pos. 10
1 x Process Ventilation Equipment Set with Automation
Including:
• Fan JM Aerofoil HT (400°C/2): HT90JM/25/4/6/20 – 4 pcs
• Inverter FWI HVAC-R 14 amp IP55 enclosure – 4 pcs
• Fan JM Aerofoil: 90JM/25/4/3/16 – 2 pcs
• Inverter FWI HVAC-R 9.5 amp IP55 enclosure – 2 pcs
• Ancillaries Set (Bellmouth inlets, Guards, Mounting Feet & Flanges, Flexible connectors, Thermisters, Anti Condensation Heaters)
Pos. 11
1 x Process Ventilation Automation Equipment Set
Including:
• pCO5 controller, Medium, w/o built-in terminal – 4 pcs
• PCO controllers Serial Board RS485 opt isolated – 4 pcs
• PCO controllers Field Bus Serial Board RS485 – 4 pcs
• PGD Touch 7" graphic terminal, touchscreen – 2 pcs
• Ancillaries Set (screw terminals, adapter cables)
Price and terms of the delivery are open to negotiation.
More informations you will find in the attached data sheet.
The cooling equipment includes:
Pos. 1:
2 Free Cooling Chiller OFC103R20(E)-99HS3
Options included:
• Discharge mufflers
• Energy manager
• Discharge air plenum
• Closed transition compressor start
• Coil guards
• Anti-vibration mounts (spring type)
• R134A leak detection system
• Evaporator differential pressure sensor
• BMS interface card (ModBus)
• Remote set point adjustment (2 set points: summer/winter, digital input)
• Pump interlock
• Flow switch
• Low ambient kit
• Compressor enclosures
• Flushing by-pass (butterfly valve)
Pos. 2
1 Chiller Sequence Manager System including chiller sequence panel
Options included:
• Chiller Sequence Panel (OPC) with 2 x pCO3 Large controllers
• Common Return Water Temperature Sensors (Primary)
• Common Supply Water Temperature Sensors (Primary)
• Common Return Water Temperature Sensors (Secondary)
• Common Supply Water Temperature Sensors (Secondary)
• Ambient Air Temperature Sensors
• Modbus RS-485 interface card
• Full Set of Spares
Pos. 3
10 Downflow Chilled Water Precision Air Conditioning Unit: SmartCool
Features:
• Type: single circuit chilled water
• Power supply: 400V / 50Hz / 3 phases
• Air filters: pleated disposable panel filters G4 (EU4)
• Colour: black grey RAL 7021
• Chilled water coil: large surface area coil manufactured from refrigeration quality copper tubes with mechanically bonded aluminium fins coated with a non-stick acrylic film (hydrophilic).
• Fans: backward curved impellers, direct drive centrefugal fan assemblies with EC motors.
• Controls: AIRETronix microprocessor controller connected to LCD keypad display.
• Air flow switch
• Additional options included:
• Upgraded EC fans
• Open Floorstand
• Motorised air damper
• Constant pressure control
• Supply air temperature control
• pCOWEB interface card
• Filter change switch
• Water detector (probe type)
• Water detector (tape type)
• Audible display (upgraded microprocessor)
• Programmable software key
• Sensors bracket
• Dual power supply ATS and UPS
• Balancing and regulating valve + actuator
Pos. 4
2 Pump Etanorm G100-250 G11 with coupling spacer
Technical data:
• Pump standard: EN 733
• Design: Baseplate mounted, long-coupled
• Orientation: Horizontal
• Driver type: electric motor
• Motor size: 280S
• Efficiency class: IE2 acc. Tto IEC 60034-30
• Motor material: Grey cast iron GG/CAST IRON
• Position of terminal box: 0°/360° (top)
• Baseplate type: U-beam/folded plate, Steel ST
• Coupling guard type: Lightweight, not tread proof
• Suction nominal dia.: DN 125, EN 1092-2
• Discharge nominal dia.: DN 100, EN 1092-2
• Suction/discharge nominal pressure: PN 16
• Shaft seal: Single acting mechanical seal, BQ1EGG
• Volute casing, discharge cover, impeller and bearing bracket material: grey cast iron JL 1040
• Shaft: Steel/Tempered steel E335/C45
• Joint ring: DPAF Sealing plate, asbestos-free
• Shaft sleeve: Stainless steel 1.4571
• Bearing type: Anti-friction bearings
• Lubrication type: Grease
• Color: Ultramarine blue (RAL 5002)
Pos. 5
2 x Pump control system Hyamaster SPS 1-750/1FU
Technical data:
• Switchgear for 1 pc. pump/motor
• Switchgear unit stainless steel 1.4301 (steel RAL 7035)
• Socket 200 mm
• 1 pc. frequency converter
• Main switch
• Air circulation cooling
• Fuses and contactors
• Terminal strip
• Set of pressure transmitters
• ModBus interface for external BMS monitoring
Pos. 6
3 x Pump Etanorm G100-200 G11 with coupling spacer
Technical data:
• Pump standard: EN 733
• Design: Baseplate mounted, long-coupled
• Orientation: Horizontal
• Driver type: electric motor
• Motor size: 225M
• Efficiency class: IE2 acc. to IEC 60034-30
• Motor material: Grey cast iron GG/CAST IRON
• Position of terminal box: 0°/360° (top)
• Baseplate type: U-beam/folded plate, Steel ST
• Coupling guard type: Lightweight, not tread proof
• Suction nominal dia.: DN 125, EN 1092-2
• Discharge nominal dia.: DN 100, EN 1092-2
• Suction/discharge nominal pressure: PN 16
• Shaft seal: Single acting mechanical seal, BQ1EGG
• Volute casing, discharge cover, impeller and bearing bracket material: grey cast iron JL 1040
• Shaft: Steel/Tempered steel E335/C45
• Joint ring: DPAF Sealing plate, asbestos-free
• Shaft sleeve: Stainless steel 1.4571
• Bearing type: Anti-friction bearings
• Lubrication type: Grease
• Color: Ultramarine blue (RAL 5002)
Pos. 7
1 x Automatic pump control system Hyamaster SPS 3-450/3FU
Technical data:
• Switchgear for 3 pcs. pumps/motors
• Switchgear unit stainless steel 1.4301 (steel RAL 7035)
• Socket 200 mm
• 3 pcs. frequency converters
• Main switch
• Air circulation cooling
• Fuses and contactors
• Terminal strip
• Set of pressure transmitters
• ModBus interface for external BMS monitoring
• LAN connection with second cabinet to provide 1+1 control redundancy of the system
Pos. 8
2 x Plate heat exchanger FP 120
Technical data:
• Plates: W 1.4404 (AISI 316L), 0,5 mm
• Gaskets: EPDM
• Frame: C-Steel, painted RAL 5012
Pos. 9
1 x Parallel/redundant precision pressure maintenance system with integrated degassing
Including:
• Precision pressure maintenance unit with pumps (integrated degassing) Transfero TPV4.1 – 4 pcs
• Primary vessel Transfero TG1000– 4 pcs
• Expansion vessel w. fixed air cushion Statico SD35.10 – 4 pcs
• Lock shield valve DLV 20 – 4 pcs
• Communication module ComCube DCD – 2 pcs
Pos. 10
1 x Process Ventilation Equipment Set with Automation
Including:
• Fan JM Aerofoil HT (400°C/2): HT90JM/25/4/6/20 – 4 pcs
• Inverter FWI HVAC-R 14 amp IP55 enclosure – 4 pcs
• Fan JM Aerofoil: 90JM/25/4/3/16 – 2 pcs
• Inverter FWI HVAC-R 9.5 amp IP55 enclosure – 2 pcs
• Ancillaries Set (Bellmouth inlets, Guards, Mounting Feet & Flanges, Flexible connectors, Thermisters, Anti Condensation Heaters)
Pos. 11
1 x Process Ventilation Automation Equipment Set
Including:
• pCO5 controller, Medium, w/o built-in terminal – 4 pcs
• PCO controllers Serial Board RS485 opt isolated – 4 pcs
• PCO controllers Field Bus Serial Board RS485 – 4 pcs
• PGD Touch 7" graphic terminal, touchscreen – 2 pcs
• Ancillaries Set (screw terminals, adapter cables)
Characteristic values
Demensions (HxWxL)
2600 x 2200 x 11550 mmm
Weight
14125 kg
Mains Supply
400 V 3 PH 50 Hz
Refrigerant Type
R134a
Cooling Capacity
1238 kW
Availability
as of now
Condition
like new
Location
Baltic states
Price
1.400.000 EUR (BN)
Additional material